Our workbenches have been designed and manufactured to satisfy the most varied demands of the market. The great capacity of these workbenches to meet any production, assembly, or test requirements is guaranteed by their wide range of accessories: hooks, brackets, and tool-holding panels. The steel feet with holes are fixed to the top of the working plane and can be fixed to the floor. An important element of the workbenches is the drawer unit, produced in various sizes and with different uses, based on the type of drawers as well as their internal subdivision.

Los contenedores plásticos serie KLT son extra fuertes con paredes reforzadas y fondo cerrado con patas pequeñas. Estas cajas tienen una estructura robusta que hace que estos contenedores sean más fuertes que otros contenedores. Debido a las paredes extra fuertes, este contenedor es muy adecuado para la industria más pesada El contenedor es apilable y también tiene un fondo liso. Esta caja está provisto de un portaetiquetas en un lado corto. La forma más eficiente de transporte y almacenamiento. Todos los contenedores están diseñados para ser apilables en pallets de 1200 x 1000 mm. y 1200 x 800 mm.

La base de las nervaduras y los pies de apilamiento garantizan la estabilidad del contenedor y evitan que el mismo se vuelque en el traslado. Más allá de eso, ofrecen condiciones favorables para la limpieza y el fuego, y son Resistentes debido a su construcción de doble pared.

El R -, RL-. La serie KLT está disponible opcionalmente con orificios de drenaje de agua en la base. Deben ser utilizados conforme a la norma VDA 4500 en la industria del automóvil, para el transporte de componentes entre fabricantes de automóviles y proveedores.

Los contenedores KLT son especialmente adecuados para:

I. Recogida automática de piezas del contenedor y colocación de pilas vacías.
II. Manejo horizontal y vertical mediante ranuras y ranuras KLT,
III. Tecnología de agarre facilitada por 2 ranuras en los lados longitudinales,
IV. Uso en sistemas de mini carga, gracias a las ranuras de agarre en la parte frontal y en los laterales.

With multiple combinations of containers and shelves, this is a small mobile warehouse. The use of space is optimal. Its structure is made of high-strength steel profile. The shelves are made of sheet metal for loads of 25kg (fixed) and 50kg (tilting). Its structure is removable for transport and storage of the trolley, allowing multiple configurations of shelves and boxes. Equipped with hard rubber coated castors and ball bearing swivel system. Galvanized steel structure. It has 2 fixed and 2 swivel castors with foot brakes that block the swivel.

Code: FLDV1730156.

Dimensions in cm: 205.2 x 82 x 181.7 h cm

1 Load table in grey multi-laminated wood covered in melamine with PVC edging
4 Perforated tool-holder panels 97.3 x 30.4 h cm
2 Brackets of 98.5 x 22 cm
2 Brackets of 98.5 x 32 cm

Our workbenches have been designed and manufactured to satisfy the most varied demands of the market. The great capacity of these workbenches to meet any production, assembly or test requirements is guaranteed by their wide range of accessories: hooks, brackets, and tool-holding panels. The steel feet with holes are fixed to the top of the working plane, and can be fixed to the floor. An important element of the workbenches is the drawer unit, produced in various sizes and with different uses, based on the type of drawers as well as their internal subdivision.

The workbenches of the <POWERFUL>series have been designed and manufactured to satisfy the most varied demands of the market. The great capacity of these workbenches to meet any production, assembly, or test requirements is guaranteed by their wide range of accessories: hooks, brackets, and tool-holding panels. The steel feet with holes are fixed to the top of the working plane and can be fixed to the floor. An important element of the workbenches is the drawer unit, produced in various sizes and with different uses, based on the type of drawers as well as their internal subdivision.

With multiple combinations of containers and shelves, this is a small mobile warehouse. The use of space is optimal. Its structure is made of high-strength steel profile. The shelves are made of sheet metal for loads of 25kg (fixed) and 50kg (tilting). Its structure is removable for transport and storage of the trolley, allowing multiple configurations of shelves and boxes. Equipped with hard rubber coated castors and ball bearing swivel system. Galvanized steel structure. It has 2 fixed and 2 swivel castors with foot brakes that block the swivel.

Metal cabinet with hinged doors for the storage of substances such as paints and solvents. Hinged doors come with magnet so they stay closed without the need to secure them with keys. Manufactured from 7 / 10 mm sheet steel, with all exposed edges bent. It is equipped with perforated shelves, their insertion and arrangement inside the cabinets is easy to make and use, as there are four perforated vertical uprights with 25 mm pitch on the inside walls of the cabinet. At the base of the cabinet is a watertight collection bin made of sheet metal, with a capacity of 47 litres. The lock is cylindrical with numbered key and optional master key, double key supplied and three-point locking.

With this cabinet, you will be able to use your PC in industrial environments. The computer cabinets can be fitted with base plates for transport with a car lift or hydraulic pallet truck, wheels for manual transport from one machine to another. The PC cabinet is equipped with a constant filtering system using positive pressure to prevent the accumulation of dust inside the cabinet. It has a viewing system with anti-glare glass that provides secure data storage and is itself a stand-up workstation.

FPK modular stackable shelving for Multibox plastic drawers. The simplest and most practical solution for configuring your workspace or storage space. Multiboxes are optimally stacked in these space-saving modules. Stackable up to 4 levels and with multiple box size configurations. Boxes slide into this rack thanks to its smooth surface, making it easy to pull out. The module is designed in such a way that a locking system can be incorporated into the multibox drawers to prevent the box from falling out of the shelf.

Metal cabinet with hinged doors for the storage of PPE (Personal Protective Equipment) and fire fighting equipment. The hinged doors come with a magnet so that they remain locked without the need to secure them with keys. It comes with die-cut acrylic for easy breaking in case of emergency and safety labels. Constructed from 7/10 mm steel plate, with all exposed flanges bent. It is equipped with perforated shelves, their insertion and arrangement inside the cabinets is easy to make and use, as there are four perforated vertical uprights with 25 mm pitch on the inside walls of the cabinet. The lock is cylindrical with numbered key and optional master key, double key supplied and three-point locking.

With its many combinations, it is a small mobile warehouse. The use of space is optimal. Its structure is made of high-strength steel profile. The shelves are made of sheet metal for loads of 25kg (fixed) and 50kg (tilting). Its structure is detachable for transport and storage of the shelving, allowing multiple configurations of shelves and boxes. Galvanised steel structure.