With multiple combinations of containers and shelves, this is a small mobile warehouse. The use of space is optimal. Its structure is made of high-strength steel profile. The shelves are made of sheet metal for loads of 25kg (fixed) and 50kg (tilting). Its structure is removable for transport and storage of the trolley, allowing multiple configurations of shelves and boxes. Equipped with hard rubber coated castors and ball bearing swivel system. Galvanized steel structure. It has 2 fixed and 2 swivel castors with foot brakes that block the swivel.

Our workbenches have been designed and manufactured to satisfy the most varied demands of the market. The great capacity of these workbenches to meet any production, assembly, or test requirements is guaranteed by their wide range of accessories: hooks, brackets, and tool-holding panels. The steel feet with holes are fixed to the top of the working plane and can be fixed to the floor. An important element of the workbenches is the drawer unit, produced in various sizes and with different uses, based on the type of drawers as well as their internal subdivision.

Domino shelving modules with metal structure and rails configurable with plastic boxes. Made of profiled sheet steel and painted in grey RAL7000. High resistance even under full load. The overlapping of the shelving and its modularity allow for excellent stacking stability enabling the creation of high storage areas or low counters that can be modified in both length and height at any time according to your needs. This system allows you to organise your warehouse with customised solutions. Stacking is possible up to a maximum of 3 modules high. Boxes can be labelled to ensure fast and efficient sorting.

The Athena Series containers have been developed and studied to support heavy loads and assist production lines, manual, automated and on Flow Racks (rollers). Specially designed for the automotive sector, they are today a world reference due to their modularity on standard pallets and their transport by trucks. The thick rims and ribbed walls have been designed to withstand heavy loads, averaging 50 kg each in static mode and 400 kg in stacked mode, maintaining these values for transport, especially in the South American region, with roads often in deteriorating conditions. In support of this, the Athena series has passed several crash tests, which make it the most resistant standardized container series in the Mercosur region. Handles, bottoms or walls can be configured in closed or open (perforated) mode, resulting in 6 (six) different configurations in each available size (see illustration on current page) Standard color: Black. Good resistance to grease and oil. Robust and resistant to high and low temperatures, depending on the condition of use, the maximum temperature range will be from -20°C to + 70°C. Particularly suitable for food contact (virgin color).

Our workbenches have been designed and manufactured to satisfy the most varied demands of the market. The great capacity of these workbenches to meet any production, assembly, or test requirements is guaranteed by their wide range of accessories: hooks, brackets, and tool-holding panels. The steel feet with holes are fixed to the top of the working plane and can be fixed to the floor. An important element of the workbenches is the drawer unit, produced in various sizes and with different uses, based on the type of drawers as well as their internal subdivision.

CONTENEDORES moldeados y fabricados por inyección en Polietileno de Alta Densidad (PEHD). Material completamente reciclable. Fácilmente lavable y inoxidable; insensible a Cambios de peso en contacto con el agua. Particularmente resistente a los rayos UV. e infrarrojos, a altas y bajas temperaturas, a ácidos y álcalis. Estructurado de tal manera que Ser apilable, para facilitar las operaciones. almacenamiento y manipulación.

With its many combinations, it is a small mobile warehouse. The use of space is optimal. Its structure is made of high-strength steel profile. The shelves are made of sheet metal for loads of 25kg (fixed) and 50kg (tilting). Its structure is detachable for transport and storage of the shelving, allowing multiple configurations of shelves and boxes. Galvanised steel structure.

Standardized industrial trolley manufactured and developed with a robust structure, mounted on four wheels. With multiple combinations of containers and shelves, this is a small mobile warehouse. It can transport plastic containers and shelves for the placement of various materials.

Our steel workbenches have been designed and manufactured to satisfy the most varied demands of the market. The great capacity of these workbenches to meet any production, assembly or test requirements is guaranteed by their wide range of accessories: hooks, brackets, and tool-holding panels. The steel feet with holes are fixed to the top of the working plane, and can be fixed to the floor.

The ZEUS series of containers are made of copolymer polypropylene. It is the ideal solution for various storage problems, whether in warehouses, assembly lines or workshops. They make it possible to keep everything tidy, labelled and within easy reach, saving man-hours and therefore competitiveness, achieving lower inventory costs.

Carro Industrial normalizado . Fabricados y desarrollados por una robusta estructura, montada sobre cuatro ruedas. En múltiples combinaciones de contenedores y estantes constituyen un pequeño almacén móvil. Pueden transportar contenedores plásticos y estantes para la colocación de materiales diversos.

Metal hinged door cabinet made with the most modern technologies and top quality materials. Hinged doors come with a magnet so that they remain locked without the need to secure them with keys. They adapt to every requirement, optimally managing the storage of different materials. They are versatile, solid, functional and can include drawers, panels, shelves and many more accessories.

Los contenedores plásticos serie KLT son extra fuertes con paredes reforzadas y fondo cerrado con patas pequeñas. Estas cajas tienen una estructura robusta que hace que estos contenedores sean más fuertes que otros contenedores. Debido a las paredes extra fuertes, este contenedor es muy adecuado para la industria más pesada El contenedor es apilable y también tiene un fondo liso. Esta caja está provisto de un portaetiquetas en un lado corto. La forma más eficiente de transporte y almacenamiento. Todos los contenedores están diseñados para ser apilables en pallets de 1200 x 1000 mm. y 1200 x 800 mm.

La base de las nervaduras y los pies de apilamiento garantizan la estabilidad del contenedor y evitan que el mismo se vuelque en el traslado. Más allá de eso, ofrecen condiciones favorables para la limpieza y el fuego, y son Resistentes debido a su construcción de doble pared.

El R -, RL-. La serie KLT está disponible opcionalmente con orificios de drenaje de agua en la base. Deben ser utilizados conforme a la norma VDA 4500 en la industria del automóvil, para el transporte de componentes entre fabricantes de automóviles y proveedores.

Los contenedores KLT son especialmente adecuados para:

I. Recogida automática de piezas del contenedor y colocación de pilas vacías.
II. Manejo horizontal y vertical mediante ranuras y ranuras KLT,
III. Tecnología de agarre facilitada por 2 ranuras en los lados longitudinales,
IV. Uso en sistemas de mini carga, gracias a las ranuras de agarre en la parte frontal y en los laterales.

The Athena Series containers have been developed and studied to support heavy loads and assist production lines, manual, automated and on Flow Racks (rollers). Specially designed for the automotive sector, they are today a world reference due to their modularity on standard pallets and their transport by trucks. The thick rims and ribbed walls have been designed to withstand heavy loads, averaging 50 kg each in static mode and 400 kg in stacked mode, maintaining these values for transport, especially in the South American region, with roads often in deteriorating conditions. In support of this, the Athena series has passed several crash tests, which make it the most resistant standardized container series in the Mercosur region. Handles, bottoms or walls can be configured in closed or open (perforated) mode, resulting in 6 (six) different configurations in each available size (see illustration on current page) Standard color: Black. Good resistance to grease and oil. Robust and resistant to high and low temperatures, depending on the condition of use, the maximum temperature range will be from -20°C to + 70°C. Particularly suitable for food contact (virgin color).

Para todo uso, Ideales para realizar huertas. Cultivo hidropónico, Huerto urbano, Cultivo orgánico

Standardized industrial trolley manufactured and developed with a robust structure, mounted on four wheels. With multiple combinations of containers and shelves, this is a small mobile warehouse. It can transport plastic containers and shelves for the placement of various materials.

PRACTIBOX is an organization and storage system, combining high-quality plastic and metal raw materials, designed to be durable and break resistant. It is made of high-impact polystyrene, with transparent cabinets and containers that allow easy visibility of the contents at a glance It is ideal for storing and organizing a wide variety of items from a wide range of items. In addition, its stackable design allows for the creation of an attractive retail display or helps keep the storage space well organized. PRACTIBOX containers open and are fully removable, making them easy to access, fill, clean, or move to a workstation. The containers have a large handle with a slot for adding labels and/or barcodes. There is a wide range of options regarding shelving, trolleys and modular cabinets compatible with the PRACTIBOX system. Ask for assistance to find your ideal model!

Metal hinged door cabinet made with the most modern technologies and top quality materials. Hinged doors come with a magnet so that they remain locked without the need to secure them with keys. They adapt to every requirement, optimally managing the storage of different materials.

Cabinet with shutter locking system to be fixed to any wall. They are manufactured with the help of the most modern technologies, using top quality materials. The security shutter is high-impact, tamper-proof and has an automatic mechanical lifting mechanism which prevents it from being pinched or falling down unexpectedly. They can be adapted to every requirement by solving the storage of different materials or tools in a rational way. It is versatile, solid, with the option of including perforated panels and incorporating tool hooks.

The Athena Series containers have been developed and studied to support heavy loads and assist production lines, manual, automated and on Flow Racks (rollers). Specially designed for the automotive sector, they are today a world reference due to their modularity on standard pallets and their transport by trucks. The thick rims and ribbed walls have been designed to withstand heavy loads, averaging 50 kg each in static mode and 400 kg in stacked mode, maintaining these values for transport, especially in the South American region, with roads often in deteriorating conditions. In support of this, the Athena series has passed several crash tests, which make it the most resistant standardized container series in the Mercosur region. Handles, bottoms or walls can be configured in closed or open (perforated) mode, resulting in 6 (six) different configurations in each available size (see illustration on current page) Standard color: Black. Good resistance to grease and oil. Robust and resistant to high and low temperatures, depending on the condition of use, the maximum temperature range will be from -20°C to + 70°C. Particularly suitable for food contact (virgin color).

Plastic boxes are used in many commercial sectors such as bookstores, autoparts, pharmaceuticals, automotive, but they are also beneficial for other industries. They are space-saving, economical and compatible with other reusable storage systems. The transport savings with the NETTUNO series crates is 6 to 1, i.e. if 6 trucks are sent with goods, one truck is brought back with empty folded crates. This product is noise-absorbing during transport and is recyclable after a long period of use The ergonomic handles protect the hands during handling. It has a robust design, with a base prepared for use on roller conveyors. Our folding boxes are light in weight, but at the same time very strong. They are stackable and can be folded and unfolded easily and safely. They are made of virgin polypropylene resistant to breakage and most oils, acids and alkalis. Their lids are sealable with hinges and can be screen-printed and heat-embossed with your company logo thanks to their smooth outer walls and are provided with a space for a label and barcode.

With its many combinations, it is a small mobile warehouse. The use of space is optimal. Its structure is made of high-strength steel profile. The shelves are made of sheet metal for loads of 25kg (fixed) and 50kg (tilting). Its structure is detachable for transport and storage of the shelving, allowing multiple configurations of shelves and boxes. Galvanised steel structure.